LG WM2450HRA Owner's Manual - Page 15

ENGLISH CONTROL PANEL FEATURES HOW TO USE 4 7 6 8 1 2 3 5 1 POWER ON/OFF BUTTON Press to turn the washer ON. Press again to turn the washer OFF. NOTE: Pressing the ON/OFF button during a cycle will cancel that cycle and any load settings will be lost. 2 CYCLE SELECTOR KNOB Turn this knob to select the desired cycle. Once the desired cycle has been selected, the standard presets will be shown in the display. These settings can be adjusted using the cycle settings buttons anytime before starting the cycle. 3 START/PAUSE BUTTON Press this button to START the selected cycle. If the washer is running, use this button to PAUSE the cycle without losing the current settings. NOTE: If you do not press the START/PAUSE button within 4 minutes of selecting a cycle, the washer automatically turns off. 4 STEAM BUTTON Press the STEAM button to add steam to the selected cycle for added cleaning power. NOTE: Steam can be added to only the following cycles: STEAM FRESH™, ALLERGIENE™, SANITARY, BULKY/LARGE, PERM. PRESS, COTTON/NORMAL. 5 CYCLE SETTINGS BUTTONS Use these buttons to adjust the desired cycle options for the selected cycle. 6 COLDWASH™ BUTTON Use this function to save energy by using cold water while ensuring proper washing. For high wash efficiency, it is recommended to use less than 8 pounds. 7 TIME AND STATUS The display shows the settings, estimated time remaining, options, and status messages for your washer. 8 OPTION BUTTONS The option buttons allow you to select additional cycle options and will light when selected. Certain buttons also allow you to activate special functions by pressing and holding the button for 3 seconds. For detailed information about the individual options, please see the following pages. 15