LG WM2450HRA Owner's Manual - Page 33

Problem, Possible Causes, Solutions

Get LG WM2450HRA PDF manuals and user guides View all LG WM2450HRA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

ENGLISH TROUBLESHOOTING BEFORE CALLING FOR SERVICE (cont.) Problem The display shows: The display shows: Possible Causes • Load is too small. • Load is out of balance. • The washer has an imbalance detection and correction system. If individual heavy articles are loaded (bath mat, bath robe, etc.) and the imbalance is too great, the washer will make several attempts to restart the spin cycle. If an imbalance is still detected, the washer will stop and the error code will be displayed. • Control error. Solutions • Add 1 or 2 similar items to help balance the load. • Rearrange items to help balance the load. • Unplug the washer and call for service. The display shows: • Water level is too high due to a faulty water valve. • C lose the water taps, unplug the washer, and call for service. The display shows: • The water level sensor is not working correctly. • C lose the water taps, unplug the washer, and call for service. The display shows: The display shows: • Thermal overload protection circuit in the motor has been tripped. • A power failure has occurred. • A llow the washer to stand for 30 minutes to allow the motor to cool; then restart the cycle. If the LE error code still appears, unplug the washer and call for service. • Restart the cycle. Staining Wrinkling • Add laundry products to the washer drum. • Washer not unloaded promptly. • Does not properly sort the clothes. • Washer not unloaded promptly. • Washer overloaded. • Hot and cold water inlet hoses are reversed. • Load the laundry products into the dispenser. • A lways remove items from the washer as soon as the cycle is completed. • A lways wash dark colors separately from light colors and whites to prevent discoloration. If possible, do not wash heavily soiled items with lightly soiled ones. • A lways remove items from the washer as soon as the cycle is completed. • T he washer can be fully loaded, but the drum should not be tightly packed with items. The door of the washer should close easily. • H ot water rinse can set wrinkles in garments. Check the inlet hose connections. 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
ENGLISH
BEFORE CALLING FOR SERVICE
(cont.)
TROUBLESHOOTING
Problem
Possible Causes
Solutions
The display shows:
Wrinkling
• Water level is too high due to
a faulty water valve.
• The water level sensor is not
working correctly.
• Washer not unloaded
promptly.
• Washer overloaded.
• Hot and cold water inlet
hoses are reversed.
The display shows:
• Control error.
• Unplug the washer and call for service.
• Close the water taps, unplug the washer, and call for
service.
• Close the water taps, unplug the washer, and call for
service.
Staining
• Add laundry products to the
washer drum.
• Washer not unloaded
promptly.
• Does not properly sort the
clothes.
• Load the laundry products into the dispenser.
• Always remove items from the washer as soon as the
cycle is completed.
• Always wash dark colors separately from light colors
and whites to prevent discoloration. If possible, do not
wash heavily soiled items with lightly soiled ones.
• Always remove items from the washer as soon as the
cycle is completed.
• The washer can be fully loaded, but the drum should
not be tightly packed with items. The door of the
washer should close easily.
• Hot water rinse can set wrinkles in garments. Check
the inlet hose connections.
The display shows:
• A power failure has occurred.
• Restart the cycle.
The display shows:
The display shows:
• Thermal overload protection
circuit in the motor has been
tripped.
• Allow the washer to stand for 30 minutes to allow the
motor to cool; then restart the cycle. If the LE error
code still appears, unplug the washer and call for
service.
The display shows:
• Load is too small.
• Load is out of balance.
• The washer has an imbalance
detection and correction
system. If individual heavy
articles are loaded (bath
mat, bath robe, etc.) and the
imbalance is too great, the
washer will make several
attempts to restart the spin
cycle. If an imbalance is still
detected, the washer will stop
and the error code will be
displayed.
• Add 1 or 2 similar items to help balance the load.
• Rearrange items to help balance the load.
33