LG WT5070CV Owners Manual - English Spanish - Page 28
Maintenance
View all LG WT5070CV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
28 MAINTENANCE MAINTENANCE Care Cleaning the Water Inlet Filters If the washer detects that water is not entering the dispenser, an error message will show on the display. If you live in an area with hard water, this may be caused by clogged inlet filters. NOTE • Use extreme care when removing and cleaning the filters. If the filters cannot be cleaned or are damaged, do NOT operate the washer without the inlet filters. Contact LG Customer Service or a qualified LG servicer. 1 Turn off both water taps completely. Unscrew the hot and cold water lines from the back of the washer. Hot O Cold O 2 Carefully remove the filters from the water inlets, and soak them in white vinegar or a lime scale remover. Rinse thoroughly before reinstalling. Press the filters back into place and reattach the water lines. Do NOT operate the washer without the inlet filters. O Inlet Filter WARNING • Unplug the power cord and turn off the faucets before cleaning. Failure to do so may cause electric shock. • Do not use the washing machine without the inlet filters. If you use the washing machine without the inlet filters it will cause leaks and malfunction. • If you use the washing machine in an area with hard water, the inlet filter may clog due to lime buildup. Contact your nearest LG customer service center if the inlet filter is not clean or is missing. A) NOTE • E message will blink on the display when the water pressure is weak or an inlet filter is clogged with dirt. Clean the inlet filter. Care in cold climates When the Water Line is frozen 1 Turn off the faucets connected with the water lines. 2 Pour hot water on the frozen faucets to thaw the water lines and pull them out. 3 Immerse the water lines in hot water to thaw them. 4 Connect the water lines with the water inlets of the washing machine and faucets. - See page 14, Connecting the water lines for details. 5 Turn on the faucets. 6 Press®, 7 Press to RINSE + SPIN. 8 Press cp. - Verify the water fills properly. When the Drain Line is Frozen 1 Pour hot water in the washer tub and close the lid. - Leave it for 10 minutes. 2 Press after 10 minutes. 3 Press USE to SPIN ONLY. 4 Press S. MIFTIMISt - Check if the water drains.