LG WT5680HWA Owners Manual - Page 24

24 HOW TO USE SPECIAL USE FEATURES After selecting a cycle, press the SPECIAL USE button to select additional features for your load. NOTE: yy To protect your garments, not every feature is available with every cycle. yy If the START/PAUSE button is not pressed within five minutes to start the cycle, the control will shut off and all settings will be lost. SOAK This option provides a 30 minute presoak prior to the start of the selected cycle. Use the SOAK option to presoak garments to help remove difficult spots or stains on fabrics. At the end of the presoak time, the selected cycle will begin with the same water used for the soak. NOTE: You cannot select the SOAK option in the TUB CLEAN, ALLERGIENE™ and STEAM WASH cycle. STAIN CARE™ Use this option for heavily soiled loads that need improved stain treatment. When Stain Care™ is selected, the wash cycle will begin with warm water to help prevent the setting of certain types of stains. Then, as the cycle progresses, hot water will be added to gradually increase the water temperature to help remove stains that require treatment at higher temperatures. NOTE: yy Best results are obtained with smaller loads (less than 6 lbs.) yy If you select STAIN CARE™, the COLDWASH™ option is not available. RINSE + SPIN Select this option to rinse and spin a load separately from a regular cycle. This can be helpful in preventing fresh stains from setting in fabrics. You can change the spin speed by pressing the SPIN SPEED button. 1. Press the POWER button to turn on the washer. 2. Press the SPECIAL USE button until the RINSE+SPIN indicator light is lit. (The cycle light will turn off.) 3. Press the START/PAUSE button to start the cycle. SPECIAL DRAIN FEATURE This washer is equipped with a special feature that is designed to make your washer as safe as possible. If the washer is paused or shut off while there is still water in the tub, the water will drain automatically after several minutes of inactivity. This helps keep children safe by reducing the possibility of water remaining in the tub. Any water remaining in the tub will automatically drain five minutes after the washer has shut off. If the washer is paused and the START/PAUSE button is not pressed within 5 minutes, the washer will shut off and all cycle settings will be lost. Any water remaining will drain five minutes later. The washer can be turned on or restarted any time before the drain begins. However, once the water begins to drain, all functions will be suspended until the water has been completely drained and the washer shuts off. SPIN ONLY Use this option to drain the water from the tub and spin out the clothes. This can be used, for example, if the wash cycle is interrupted by a power failure. The spin speed can be adjusted by using the SPIN ONLY button. 1. Press the POWER button to turn on the washer. 2. Press the SPECIAL USE button repeatedly until Spin Only is selected. 3. Press the SPIN SPEED button to select the desired spin speed. Selecting NO SPIN is not allowed. 4. Press the START/PAUSE button.