Lacie 301162U User Manual - Page 15
Turning On the Ethernet Disk RAID
UPC - 093053707361
View all Lacie 301162U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
LaCie Ethernet Disk RAID (Firmware version 1.4) User Manual Installing Your Ethernet Disk RAID page 14 3.2. Turning On the Ethernet Disk RAID 1. Insert the power cable into the power outlet on the back of the unit and plug the other end into a power socket. 2. Once you have connected the power cord, press the power button on the front (see in Fig. 3.2.). The System Status LED light will blink green while the Ethernet Disk RAID is booting up. When the system has finished booting up, the System Status LED and Disk Status LED will remain green. The System Status LED will turn solid yellow when you power up the system for the first time, indicating the hard drives are not configured with a RAID level. It will remain yellow until the drives are configured then the Status System LED will turn solid green. 1 2 A Fig. 3.2. Technical note: It is recommended that you plug the Ethernet Disk RAID into a surge protector or uninterruptible power supply to prevent damage to the system from power surges.