Lacie 301162U User Manual - Page 19
Initializing the Disks
UPC - 093053707361
View all Lacie 301162U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
LaCie Ethernet Disk RAID (Firmware version 1.4) User Manual Configuring Your Ethernet Disk RAID page 18 4.3. Initializing the Disks Once you have installed the Console (as described in section 5.2. Logging In to the Manager), started it, and connected to the Ethernet Disk RAID (as described in section 4.2. Starting the Console), the System Initialization page appears (Fig. 4.3.). If not all the hard disks have been detected, or if you want to add, remove, or re-order the disks at this time, insert or remove the disks one at a time and click Scan after each action. Fig. 4.3. To initialize the hard disks: 1. Click Start. The firmware is uploaded to the hard disks. When this process is complete, the Ethernet Disk RAID will restart. 2. Close the browser window. After the system has restarted, you can perform initial configuration (as described in section 4.4. Configuring the Ethernet Disk RAID). Technical note: The operating system and Ethernet Disk RAID software are installed on each disk in your Ethernet Disk RAID to ensure that the failure or removal of any one disk will not cause the entire system to fail.