Lacie 301389U User Manual - Page 10
Connect the Ethernet Cable
UPC - 093053754730
View all Lacie 301389U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
LaCie Network Space • DESIGN BY NEIL POULTON User Manual 2.2. Connect the Ethernet Cable Unlike regular desktop hard drives, the LaCie Network Space is only accessible when attached to your network with the Ethernet cable and does not connect directly to your computer with a USB cable. To connect the Ethernet cable: 1. Turn the drive on. See 2.1. Turn the Drive On. 2. Connect the Ethernet cable to the Ethernet port on the back of the LaCie Network Space. 3. Connect the other end of the Ethernet cable into an available Ethernet "out" port on your router or hub (refer to your router or hub's documentation if necessary). Allow a few moments for your network to recognize the drive. Now move on to step 3, section 2.3. Connect with LaCie Network Assistant. IMPORTANT INFO: Do not connect the LaCie Network Space directly to your computer via the USB port. The USB port is intended only for connection of other USB storage devices. Gigabit Ethernet Cables And Connectors The Ethernet cable used to connect your LaCie Network Space to your network device looks like this: Figure 2.2 The ends of the Ethernet cable are the same and either end can be connected to the LaCie Network Space or your router. Setup page 10 Router or hub OUT IN