Lantronix 22365 Installation Guide Rev C PDF 578.84 KB - Page 7

Lantronix EDCA-DIO-01 Install Guide EDCA-DIO-01 Installation The EDCA-DIO-01 requires power and can be powered by the same power supply providing power to the Lantronix Ethernet switch in the cabinet. The power port (marked DC Input) is a 2-wire Terminal Block supporting 20 - 60 VDC. The DI ports must also be 2-wire terminal blocks on the Lantronix Ethernet switch. Lantronix sells as an optional accessory a universal mechanical door contact closure switch that works with a variety of enclosures. However, your cabinet manufacturer may provide their own door closure contact switch. The switch requires wire connection terminals. The figure below shows a Lantronix SISPM1040-384-LRT-C Ethernet switch, EDCA-DIO-01, and power supply in a single cabinet/enclosure. Warning: Ensure that the target alarm input is capable of accepting the applied voltage (12VDC in this example). Note: If installing external audio or visual alarm equipment, place that equipment in series with the 22365 or with the switch that came with the cabinet. 33790 Rev. C https://www.lantronix.com/ 7