Lantronix EO2Px Series User Guide Rev F PDF 2.50 MB - Page 33
Firmware Upgrade Procedures, HTTP SW Update Procedure
View all Lantronix EO2Px Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Firmware Upgrade Procedures All upgrades require accessing the Device page in the web interface which requires that you are logged in. You may need to login as the sessions timeout and reboots clear the sessions. Login with the password (admin by default) when asked. For all examples 192.168.0.1 is the Local Unit (EO2PSE4052-111) and 192.168.0.2 is the Remote Unit (EO2PD4052-111). Note: all HTTP SW Update upgrades are handled directly by the web server on the EO2P device. The web server expects these files to show up quickly so it is best to copy the update files locally to the PC running the update. In other words, trying to give the "HTTP SW Update" a file from a network mounted file system will likely fail the first attempt. The EO2P device will reboot, you will have to login again, and usually the network mounted file will work the second time around as the file should be in the PC's cache. You would typically have them in your Downloads directory. HTTP SW Update Procedure 1. Check if EO2P firmware upgrade (or downgrade) is needed by browsing to the Device page on 192.168.0.1 and comparing the EoC FW Version to the expected version. If update is necessary: 2. On the Device page on 192.168.0.1, scroll to the HTTP SW Update section and click the Browse... button. The files are named like this and per the note above should be available on your computer's hard drive: □ Local: dcp362_v1_x_osup-SPIRIT.v6_4_r398+73_cvs.ftp □ Remote: dcp362_v1_x_osup-SPIRIT.v6_4_r398+73_cvs.ftp 3. Browse to and select the file to be upgraded with and click the Open button. A local source is the most effective. 4. Click the OK button in the HTTP SW Update section: 33706 Rev. F EO2P User Guide |Page 33