Lantronix EO2Px Series User Guide Rev F PDF 2.50 MB - Page 6

Features, Client for DHCP, DNS, NTP

Get Lantronix EO2Px Series PDF manuals and user guides View all Lantronix EO2Px Series manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

Features Features • Copper or fiber combo Ethernet port • IEEE 802.3af/at compliant Remote PoE+ port for powering cameras or other remote devices • Full PoE+ at 335-1500 ft. over a single twisted pair or 1500-6800 ft. over multiple twisted pairs (dependent on cable type). To determine power and distance for specific cable types, refer to the online calculator at https://www.transition.com. • Half-Gigabit Ethernet speeds over UTP cable at distances of 660 feet (200m) or Fast Ethernet speeds at 2000 feet (610m) (dependent on wire gauge). (Typical 24 AWG cable DC resistance of 20 ohm per 1000 ft. A cable with less DC resistance may increase distance.) • Web browser configurable; Web-based management of both local and remote • Plug-and-Play installation • Field upgradeable firmware • Can be managed through a single IP address • Auto MDI/MDI-X • 128 Bit AES encryption over 2-wire STP or UTP • IPv4 and IPv6 supported • Client for DHCP, DNS, NTP • Maximum frame size 1518 bytes • Proprietary 2-wire SELV end device classification prevents power delivery to unintended devices. • Power monitoring allows user to determine power available at the remote device over different cable lengths. • Auto Power Reset (APR): PoE+ connected device can be monitored and power cycled/rebooted in the event it becomes unresponsive. • Reverse polarity protected, but does not support telco -48V (positive connection to earth ground). 33706 Rev. F EO2P User Guide |Page 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
EO2P User Guide
|Page 6
33706 Rev. F
Features
Features
•
Copper or fiber combo Ethernet port
•
IEEE 802.3af/at compliant Remote PoE+ port for powering cameras or other remote
devices
•
Full PoE+ at 335-1500 ft. over a single twisted pair or 1500-6800 ft. over multiple
twisted pairs (dependent on cable type). To determine power and distance for
specific cable types, refer to the online calculator at
.
•
Half-Gigabit Ethernet speeds over UTP cable at distances of 660 feet (200m) or Fast
Ethernet speeds at 2000 feet (610m) (dependent on wire gauge). (Typical 24 AWG
cable DC resistance of 20 ohm per 1000 ft. A cable with less DC resistance may
increase distance.)
•
Web browser configurable; Web-based management of both local and remote
•
Plug-and-Play installation
•
Field upgradeable firmware
•
Can be managed through a single IP address
•
Auto MDI/MDI-X
•
128 Bit AES encryption over 2-wire STP or UTP
•
IPv4 and IPv6 supported
•
Client for DHCP, DNS, NTP
•
Maximum frame size 1518 bytes
•
Proprietary 2-wire SELV end device classification prevents power delivery to
unintended devices.
•
Power monitoring allows user to determine power available at the remote device
over different cable lengths.
•
Auto Power Reset (APR): PoE+ connected device can be monitored and power
cycled/rebooted in the event it becomes unresponsive.
•
Reverse polarity protected, but does not support telco -48V (positive connection to
earth ground).