Lantronix MSSLite MSS Reference Manual - Page 48
Change Password Protect, Change Portname
View all Lantronix MSSLite manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Change Password Protect 2.44 Change Password Protect Command Reference CHANGE PORT PortList PASSWORD PROTECT DISABLED ENABLED Controls whether a password is needed to log into the MSS from a serial port. For models with a dedicated console port (the MSS-Via, MSS485, and the MSSLite A and C), this command will also affect the serial console port. To set the login password, use the Change Loginpass command. Restrictions Requires privileged user status. Parameters Port MSS4 only. Specifies a particular port or group of ports. Note: In the absence of the PortList parameter, the configuration will affect the MSS4's current port only. PortList Specify a particular port or group of ports. Port numbers are specified with integers between 1 and 4, and should be separated with commas (for lists) or dashes (for ranges). Defaults Disabled See Also Change Loginpass, page 2-31. 2.45 Change Portname CHANGE PORT PortList PORTNAME name Renames the specified serial port. Restrictions Requires privileged user status. Parameters Port MSS4 only. Specifies a particular port or group of ports. Note: In the absence of the PortList parameter, the configuration will affect the MSS4's current port only. PortList Specify a particular port or group of ports. Port numbers are specified with integers between 1 and 4, and should be separated with commas (for lists) or dashes (for ranges). name Enter a 16-character name composed of alphanumeric characters or the underscore character. Enclose the password in quotation marks to preserve case. Defaults 2-38 Port_1 (also Port_2, Port_3, and Port_4 for MSS4 only)