Lantronix N-GXE-xx-02 Series N-GXE-xx-02 Series User Guide Rev C - Page 13

Lantronix N-GXE-xx-02 User Guide Driver Installation 1. When you start Windows, if the "Found New Hardware" wizard displays on the screen. 2. Go into "My Computer" to the download location and access the folder for your OS version. 3. Double-click the file "Setup.exe" to start the driver installation program. 4. Complete the wizard to automatically install the drivers/software. Restart the computer if prompted. Driver Install Example The Windows 7 64-bit installation procedure is as follows. 1. Download the Drivers [ZIP] file from https://www.lantronix.com/products/n-gxe-xx-02-series-2/. 2. Unzip the driver to your computer (e.g., for Windows 7 64 bit OS, the driver should be unzipped in the C:\WINDOWS7\64 directory. 3. Shut down the computer and then remove the N-GXE NIC from the computer. 4. Run "WinUinst64.exe" (under C:\WINDOWS7\64) and make sure the old version driver is deleted completely. 5. Run "Winsetup64.exe" (under C:\WINDOWS7\64) and pre-install the new driver. 6. Insert the N-GXE NIC into the computer and after you make sure it is installed properly, restart the computer. The computer should detect the network adapter and automatically install the driver. Notes: 1. If a message displays saying that the driver is not digitally signed by Microsoft, click Yes. 2. If the message "Windows has finished installing the software for this device" displays, click Finish to complete the installation, and then restart Windows if needed. 33748 Rev. C https://www.lantronix.com/ 13