Lantronix S3220 Series User Guide Rev J PDF 34.75 MB - Page 434

Transition Networks ION x222x / x32xx User Guide The ION card's firmware version must be newer than a specified version, otherwise this message is returned. You used the go command to switch to another card, but the system checked its version and decided that the new CLI can not be run on this card at this firmware version. 1. Check the card's current firmware version. 2. Upgrade the card firmware if not latest version. See "Upgrade the IONMM and/or NID Firmware" on page 261. 3. Retry the operation. 4. If the problem persists, contact Technical Support. See Contact Us below. ERROR Software version of this card ("xx") is not supported, please upgrade to the same version as the IONMM Getting card version failed The failure get template config handler was called. Software version of this card is too old, please upgrade it! The ION card's firmware version was checked and found to be too old to support this newer CLI command. 1. Upgrade the card firmware. See "Upgrade the IONMM and/or NID Firmware" on page 261. 2. Retry the operation. 3. If the problem persists, contact Technical Support. See Contact Us below. This command is only valid on an IONMM! Cannot show slot info on this card! You entered a "show slot info" command on an ION card other than an IONMM card. 1. Enter another (supported) show command on this card, or use the "go" command to switch to the IONMM. 2. Retry the operation. 3. If the problem persists, contact Technical Support. See Contact Us below. 33472 Rev. J https://www.transition.com Page 434 of 700