Lantronix S3220 Series User Guide Rev J PDF 34.75 MB - Page 58

Transition Networks ION x222x / x32xx User Guide Installing the USB Driver (Windows XP) IMPORTANT The following driver installation instructions are for the Windows XP operating system only. Installing the USB driver using another operating system is similar, but not necessarily identical to the following procedure. To install the USB driver on a computer running Windows XP, do the following. 1. Extract the driver (from the TN website) and place it in an accessible folder on the local drive of the PC. 2. Connect the NID to the USB port on the PC. Note: for slide‐in modules installed in an ION Chassis, the USB connection will be made to the ION Management Module if one is installed in the chassis. The Welcome to the Found New Hardware Wizard window displays. 3. Select No, not this time. 4. Click Next. The installation options window displays. 5. Select Install from a list or specific location (Advanced). 6. Click Next. The driver search installation options window displays. 7. Click Browse. 8. Locate and select the USB driver downloaded in step 1 above. 9. Click Next. Driver installation begins. 10. When the finished installing screen displays, click Finish. The USB driver installation is complete. You must now configure the COM port to be used by the terminal emulator. 33472 Rev. J https://www.transition.com Page 58 of 700