Lantronix SISGM1040-284-LRT Web User Guide Rev E - Page 249

Lantronix SISGM1040-284-LRT Web User Guide Configuration > ConsoleFlow and LPM This page lets you configure ConsoleFlow parameters. This page has four sections: the Status, Configuration, ConsoleFlow Connection 1, and Connection 2 sections as shown and described below. ConsoleFlow is Lantronix cloud-hosted management platform that provides a single pane of glass for centralized management and automated monitoring of all deployed Lantronix Remote Environment Management and IoT products, along with real-time notifications, managed APIs and data dashboards. For more information see https://www.lantronix.com/consoleflow/. Lantronix Provisioning Manager (LPM) is a software application that provisions, configures and updates Lantronix Console Managers and IoT Gateways for local site installations and deployments. LPM discovery is enabled by default and is not configurable. For more LPM information see https://www.lantronix.com/products/lantronixprovisioning-manager/. There are three pieces of information that the ConsoleFlow client needs to complete registration and to publish data and configuration to the ConsoleFlow server: Serial Number, Device ID, and Device Key. The Serial Number is always preprogrammed on the device (typically derived from the MAC address of the first Ethernet port). A new device would also be preprogrammed with the Device ID and Key. For existing devices where the ID and Key are not pre-programmed, LPM uses Lantronix proprietary search and query protocol to get the device serial number, and then uses the switch REST API interface to set the Device ID and Device Key. Supported Firmware Versions Devices must meet firmware requirements in order to work with ConsoleFlow and LPM. SISPM1040-362-LRT and SISPM1040--284-LRT require firmware v 7.20.0121 or above. ConsoleFlow Agent Configuration Navigate to Configuration > ConsoleFlow to display the ConsoleFlow Agent Configuration page: Parameter descriptions: Status: Client state: Displays the existing ConsoleFlow client state (e.g., Exited, Active, Inactive, Running, or Not Registered) . 33809 Rev. E https://www.lantronix.com/ Page 249 of 446