Lantronix SISGM1040-284-LRT Web User Guide Rev E - Page 251
Content Check Interval, Status Update Interval
View all Lantronix SISGM1040-284-LRT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 251 highlights
Lantronix SISGM1040-284-LRT Web User Guide Status Update Interval : Select the amount of time in minutes between updates (1-1440 minutes). The default is 1 minute. This is the frequency that the switch updates the device status to ConsoleFlow. Content Check Interval : Select the amount of time in minutes between content checks (1-56160 minutes). The default is 1 minute. This is the frequency that the switch checks ConsoleFlow for updates to configuration or firmware. The valid range is 1 hour - 2160 hours (90 days). Apply Firmware Updates : Check the box to enable automatic switch firmware upgrades via ConsoleFlow. The default is enabled. Apply Configuration Updates : Check the box to enable automatic switch configuration upgrades via ConsoleFlow. The default is enabled. Active Connection: At the dropdown select the configuration you want to be active (i.e., Connection 1 or Connection 2. The default is Connection 1. This is the connection to use when connecting to ConsoleFlow. The configurable parameters for Connection 1 and Connection 2 are shown and described below. Connection 1 : Host : Enter the IP address or host name of the ConsoleFlow server for Connection 1. This is used by ConsoleFlow to register the switch. Port : Enter the port number for Connection 1. The default is port 443. Secure Port : Check the box to make the selected port a secure port for Connection 1. The default is enabled. Validate Certificates : Check the box to force using certificate validation for Connection 1. The default is enabled. To validate certificates, Secure Port must be enabled. Connection 2 : Host : Enter the IP address of the ConsoleFlow Host for Connection 2. Port : Enter the port number for Connection 2 for Connection 2. The default is port 443. Secure Port : Check the box to make the selected port a secure port for Connection 2. The default is enabled. 33809 Rev. E https://www.lantronix.com/ Page 251 of 446