Lantronix SISPM1040-362-LRT Web User Guide Rev J PDF 16.42 MB - Page 249
xFFFF, Address, Control, Protocol, Source IP, IP Fragment, Sport, Dport, Policy
View all Lantronix SISPM1040-362-LRT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 249 highlights
Lantronix SISPM1040-384-LRT-C & -362-LRT Web User Guide PCP : Priority Code Point: Valid values of PCP are specific (0, 1, 2, 3, 4, 5, 6, 7) or range(0-1, 2-3, 4-5, 6-7, 03, 4-7) or 'Any'. DEI : Drop Eligible Indicator: Valid value of DEI is 0, 1 or 'Any'. Frame Type : Select one of these values: Any, Ethernet, LLC, SNAP, IPv4, or IPv6., as explained below 1. Any : Allow all types of frames. 2. EtherType : Valid value can be 0x600 - 0xFFFF excluding 0x800 (IPv4) and 0x86DD (IPv6) or 'Any'. 3. LLC : Select: DSAP Address: Valid DSAP(Destination Service Access Point) can be 0x00 to 0xFF or 'Any'. SSAP Address: Valid SSAP(Source Service Access Point) can vary from 0x00 to 0xFF or 'Any'. Control : Valid Control field can vary from 0x00 to 0xFF or 'Any'. 4. SNAP : PID Valid PID(a.k.a Ether Type) can be 0x0000-0xFFFF or 'Any'. 5. IPv4 : Protocol : IP protocol number: (0-255, 'TCP' or 'UDP') or 'Any'. Source IP : Specific Source IP address in value/mask format or 'Any'. IP and Mask are in the format x.y.z.w where x, y, z, and w are decimal numbers between 0 and 255. When Mask is converted to a 32-bit binary string and read from left to right, all bits following the first zero must also be zero. If a port is configured to match on DMAC/DIP, this field is the Destination IP address. IP Fragment : IPv4 frame fragmented option: 'Yes', 'No' or 'Any'. DSCP : Diffserv Code Point value (DSCP): It can be a specific value, range of values or 'Any'. DSCP values are in the range 0-63 including BE, CS1-CS7, EF or AF11-AF43. Sport : Source TCP/UDP port: (0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP. Dport : Destination TCP/UDP port: (0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP. 6. IPv6 : Protocol IP protocol number: (0-255, 'TCP' or 'UDP') or 'Any'. Source IP 32 LS bits of IPv6 source address in value/mask format or 'Any'. If a port is configured to match on DMAC/DIP, this field is the Destination IP address. DSCP Diffserv Code Point value (DSCP): It can be a specific value, range of values or 'Any'. DSCP values are in the range 0-63 including BE, CS1-CS7, EF or AF11-AF43. Sport Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP. Dport Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP. Action Parameters : Indicates the classification action taken on ingress frame if parameters configured are matched with the frame's content. The action fields are: CoS : Class of Service: (0-7) or 'Default'. DP: Drop Precedence Level: (0-1) or 'Default'. DSCP (Differentiated Services Code Point): (0-63, BE, CS1-CS7, EF or AF11-AF43) or 'Default'. PCP (Priority Code Point) : (0-7) or 'Default'. Note: PCP and DEI cannot be set individually. DEI (Drop Eligible Indicator): Select (0-1) or 'Default'. Policy : ACL Policy number: (0-255) or 'Default' (empty field). 'Default' means that the default classified value is not modified by this QCE. 33728 Rev. J https://www.lantronix.com/ Page 249 of 499