Lantronix SISPM1040-362-LRT Web User Guide Rev J PDF 16.42 MB - Page 69
Parameter descriptions, Delete, Engine ID, User Name, Security Level, Authentication Protocol
View all Lantronix SISPM1040-362-LRT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Lantronix SISPM1040-384-LRT-C & -362-LRT Web User Guide 2-5.1.7.4 Users This function is used to configure SNMPv3 users. The Entry index key is UserName. You can create up to 10 users. To configure SNMP Users in the web UI: 1. Click Configuration, Security, Switch, SNMP, Users. 2. Click Add New Entry. 3. Specify the Privilege parameter. 4. Click Apply. Figure 2-5.1.7.4: SNMPv3 User Configuration Parameter descriptions: Delete : Check to delete the entry. It will be deleted during the next save. Engine ID : An octet string identifying the engine ID that this entry should belong to. The string must contain an even number (in hexadecimal format) with 10-64 digits, but all-zeros and all-'F's are not allowed. The SNMPv3 architecture uses the User-based Security Model (USM) for message security and the View-based Access Control Model (VACM) for access control. For the USM entry, the usmUserEngineID and usmUserName are the entry's keys. In a simple agent, usmUserEngineID is always that agent's own snmpEngineID value. The value can also take the value of the snmpEngineID of a remote SNMP engine with which this user can communicate. In other words, if user engine ID equal system engine ID then it is local user; otherwise it's remote user. User Name : A string identifying the user name that this entry should belong to. The allowed string length is 1 - 32 characters, and the allowed content is ASCII characters 33 - 126. Security Level : Sets the security model that this entry should belong to. Possible security models are: NoAuth, NoPriv: No authentication and no privacy. Auth, NoPriv: Authentication and no privacy. Auth, Priv: Authentication and privacy. The value of security level cannot be modified if entry already exists. That means it must first be ensured that the value is set correctly. Authentication Protocol : Indicates the authentication protocol that this entry should belong to. Possible authentication protocols are: None: No authentication protocol. MD5: An optional flag to indicate that this user uses MD5 authentication protocol. SHA: An optional flag to indicate that this user uses SHA authentication protocol. 33728 Rev. J https://www.lantronix.com/ Page 69 of 499