Lantronix SLP Lantronix SLP - User Guide - Page 10
: Installation, Standard Accessories, Equipment Overview - securelinx h8
View all Lantronix SLP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
2: Installation Prior to installation, refer to the following lists to ensure that you have all the items shipped with the unit as well as all other items required for proper installation. Standard Accessories Mounting bracket hardware: Vertical (SLP-V, SLPY* models) - two removable flanges with four M4 screws and two mounting L-brackets with two nut plates and four sets of screws and washers Horizontal/Rack (SLP-H, SLPX* models) - two mounting brackets and four screws RJ45 to RJ45 serial rollover cable RJ45 to DB9F serial port adapter (for connection to standard DB9M DTE serial port) Outlet retention clips, one per outlet (208-240V units only) Power input retention bracket hardware Two removable T-brackets with two 40mm screws Additional required Items: Phillip screwdriver Screws, washers and nuts to attach the SLP to your rack Power input cord (purchased separately) *SLPY, SLPX includes RJ12 link cable Equipment Overview The outlets are labeled 1 through 16. These numbers may be used in commands that require an outlet name. See Outlet Naming and Grouping for more information. The power inlet connects to the electrical power source. Figure 2-1 shows the hardware features of the SLP. Note: Models SLP-H8 and SLP-V16 are displayed in the following illustration. Other models may have variations. SecureLinx SLP Remote Power Manager 9