Lantronix SLP Lantronix SLP - User Guide - Page 18
Environmental Monitoring, Configuration, Configuring the Input Current LED display orientation
View all Lantronix SLP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
3: Operations Outlet State Control State Description of outlet status required On/Error varies Error State - Outlet should be off but current is sensed at the outlet Off/Error varies Error State - Outlet should be on but no current is sensed at the outlet Off/Fuse On Outlet should be on but a blown fuse has been detected. No Comm varies Communication to the outlet has been lost* * Control State will be applied when communication is re-established Environmental Monitoring The Environmental Monitoring section offers access to the Input Load page. This section is available to administrative level users and users with Environmental Monitoring view rights. Input Load The Input Load page displays the absolute and descriptive name and the cumulative input load in amperes of all devices attached to the unit at the time the page was loaded. This page will refresh automatically every 10 seconds. Sensors The Sensors page displays the temperature/humidity sensor's absolute and descriptive names. The sensor page also displays temperature/humidity sensor readings in degrees Celsius and percent relative humidity. This page will refresh automatically every 10 seconds. Configuration The Configuration section offers access to all unit configuration options including System, Network, Telnet/SSH, HTTP/SSL, Serial Port, Outlets, Groups, Users, FTP, SNTP/Syslog,SNMP, LDAP, TACACS+ and Email. This section is available to administrative level users only. System The System configuration page is used for reference of system information such as Ethernet NIC Serial Number, Ethernet MAC address and system firmware and hardware revisions as well as assignment and maintenance of the system location and unit descriptive names. For description names, up to 24 alphanumeric and other characters (ASCII 33 to 126 decimal - spaces and colon characters are not allowed) are allowed. Note: Spaces may be used for the location description only. Creating a descriptive system location name: 1. Enter a descriptive name and press Apply. Configuring the Input Current LED display orientation: SecureLinx SLP Remote Power Manager 17