Lantronix SLP Lantronix SLP - User Guide - Page 14
SecureLinx SLP Remote Power Manager, Subnet Mask
View all Lantronix SLP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
2: Installation The following network defaults allow unit configuration out-of-the-box through either Telnet/SSH or via a web browser: IP address: 192.168.1.254 Subnet Mask: 255.255.255.0 Gateway: 192.168.1.1 The local PC network connection must be configured as Noted below: Note: Contact your system administrator for instructions in reconfiguring the network connection. Reconfiguration of your network connection may require a restart to take effect. IP address: Subnet Mask: 192.168.1.x (where x is 2-253) 255.255.255.0 SecureLinx SLP Remote Power Manager 13
2: Installation
The following network defaults allow unit configuration out-of-the-box through either
Telnet/SSH or via a web browser:
IP address:
192.168.1.254
Subnet Mask:
255.255.255.0
Gateway:
192.168.1.1
The local PC network connection must be configured as Noted below:
Note:
Contact your system administrator for instructions in reconfiguring the
network connection.
Reconfiguration of your network connection may
require a restart to take effect.
IP address:
192.168.1.x (where x is 2-253)
Subnet Mask:
255.255.255.0
SecureLinx SLP Remote Power Manager
13