Lantronix TN-USB3 Series TN-USB3 Series User Guide Rev E - Page 11

Lantronix TN-USB3-xx-01Series User Guide Installation Overview 1. Plug the TN-USB3-xx-01 to the PC's USB 3.0 port. If it works (LEDs lit and device detected), you do not need to perform additional steps. If there is a problem with operation, continue with the rest of the steps below. 2. Procure and load the latest AX88179 driver from ASIX. See Available Drivers below. 3. Procure and load the latest driver for the PC's USB 3 Host Controller(s), either from the OS provider or the Host Controller chipset manufacturer (e.g., Intel). 4. Reboot the PC and try again. 5. Be patient. The first time you plug in the TN-USB3-xx-01, it may take 2 full minutes for the driver to install, before it begins working. 6. Disable SelectiveSuspend and SSIdleTimeout power saving features. Driver Installation Available Drivers The Lantronix Scorpion drivers page and the ASIX Drivers Download site provide the driver packages. From the ASIX webpage choose Downloads then Software & Tools to locate the driver for your OS. Select the appropriate driver package and unzip it. Each driver package has a Readme.txt file that describes the driver's configurable parameters. Each driver package has a History.txt file that says you must first uninstall any older version driver setup program, and also provides a version history for the particular driver setup program. The supported downloaded drivers have these filenames: 1. AX88179_178A_LINUX_DRIVER_v1.14.4_SOURCE.zip 2. AX88179_178A_Macintosh_10.6_to_10.12_Driver_Installer_v2.8.0_20160912.zip 3. AX88179_178A_Win7_32bit_Driver_v1.12.11.0_WHCK.zip 4. AX88179_178A_Win7_64bit_Driver_v1.14.11.0_WHCK.zip 5. AX88179_178A_Win7_v1.x.11.0_Drivers_Setup_v3.0.3.0.zip 6. AX88179_178A_Win10_8.x_32bit_Driver_v1.18.2.0_WHCK.zip 7. AX88179_178A_Win10_8.x_64bit_Driver_v1.18.2.0_WHCK.zip 8. AX88179_178A_Win10_8.x_v1.18.2.0_Drivers_Setup_v1.0.0.0.zip 33644 Rev. E https://www.lantronix.com Page 11 of 27