Lantronix TN-USB3 Series TN-USB3 Series User Guide Rev E - Page 18

Lantronix TN-USB3-xx-01Series User Guide Windows 7 Driver Configurable Parameters Configurable parameters for idle or downed links: 1. SpeedDuplex: Set the Ethernet link speed. -Auto: Auto detect the Ethernet link speed -10Half: Set the Ethernet force on 10HD -10Full: Set the Ethernet force on 10FD -100Half: Set the Ethernet force on 100HD -100Full: Set the Ethernet force on 100FD -1000Full: Set the Ethernet force on 1000FD 2. NetworkAddress : Lets you set a MAC address of the device or use the device default MAC address. 3. FlowControl: Configure flow control advertised capabilities. -Disabled Disable flow control -TxEnabled Enable transmit flow control -RxEnabled Enable receive flow control -RxTxEnabled Enable transmit and receive flow control 4. Packet Priority & VLAN: Enable or disable the ability to insert the 802.1Q priority and VLAN tags into the transmit packets. -Packet Priority & VLAN Disabled Disable to insert the 802.1Q priority and VLAN tag -Packet Priority Enabled Only enable to insert the 802.1Q priority tag -VLAN Enabled Only enable to insert the 802.1Q VLAN tag -Packet Priority & VLAN Enabled Enable to insert the 802.1Q priority and VLAN tag 5. VLAN ID: If user set a valid VLAN ID, the driver inserts the VLAN tag with this VLAN ID into the transmit packets and device will filter the received packets. 6. AutoDetach: This feature is basically a soft-disconnect from the USB host when the Ethernet link is down/ cable unplugged. Enable or disable AutoDetach ability. If AutoDetach is enabled, three seconds later after Ethernet cable was unplugged, the device will be detached from USB. -Disabled Disable AutoDetach -Enabled Enable AutoDetach -Use EEPROM Setting Disable or enable AutoDetach according to the EEPROM setting 7. SelectiveSuspend: Allows NDIS to suspend an idle AX88179B network adapter by transitioning the adapter to a lower-power state. -Disabled Disable SelectiveSuspend function -Enabled Enable SelectiveSuspend function 8. SSIdleTimeout: Selective suspend idle time-out in units of seconds. If selective suspend is enabled and the unit is idle for SSIDLE Timeout seconds, then the adapter can transition to a lower-power state. 33644 Rev. E https://www.lantronix.com Page 18 of 27