Lantronix XPort AR XPort AR - User Guide - Page 97

IP Address Filter, To con the IP address filter, IP Address Filter Settings, Remove

Get Lantronix XPort AR PDF manuals and user guides View all Lantronix XPort AR manuals
Add to My Manuals
Save this manual to your list of manuals

Page 97 highlights

11: Maintenance and Diagnostics Settings IP Address Filter The IP address filter specifies the hosts and subnets permitted to communicate with the XPort AR device. Note: If using DHCP/BOOTP, ensure the DHCP/BOOTP server is in this list. To configure the IP address filter: 1. Click IP Address Filter on the menu bar. The IP Address Filter page opens to display the current configuration. Figure 11-12 IP Address Filter Configuration Note: If you enter any filter, be careful to make sure that your network IP address is covered. Otherwise you will loose access to the XPort AR. You will have to then access the XPort AR from a different computer to reset the configuration. 2. Enter or modify the following settings: IP Address Filter Settings IP Address Network Mask 3. Click Add. Table 11-13 IP Address Filter Settings Description Enter the IP address to add to the IP filter table. Enter the IP address' network mask in dotted notation. Note: In the Current State table, click Remove to delete any existing settings, as necessary. XPort AR User Guide 97

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
11: Maintenance and Diagnostics Settings
XPort AR User Guide
97
IP Address Filter
The IP address filter specifies the hosts and subnets permitted to communicate with the
XPort AR
device.
Note:
If using DHCP/BOOTP, ensure the DHCP/BOOTP server is in this list.
To configure the IP address filter:
1.
Click
IP Address Filter
on the menu bar. The IP Address Filter page opens to display the
current configuration.
Figure 11-12
IP Address Filter Configuration
Note:
If you enter any filter, be careful to make sure that your network IP address is
covered.
Otherwise you will loose access to the XPort AR.
You will have to then access
the XPort AR from a different computer to reset the configuration.
2.
Enter or modify the following settings:
Table 11-13
IP Address Filter Settings
3.
Click
Add.
Note:
In the Current State table, click
Remove
to delete any existing settings, as
necessary.
IP Address Filter
Settings
Description
IP Address
Enter the IP address to add to the IP filter table.
Network Mask
Enter the IP address’ network mask in dotted notation.