Lantronix xPico xPico - Development Kit Quick Start - Page 9

Con Your xPico Device, xPico Module

Get Lantronix xPico PDF manuals and user guides View all Lantronix xPico manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

Configure Your xPico Device Using DeviceInstaller it is easy to configure the unit over the network. xPico Module From DeviceInstaller it is easy to start the Lantronix browser-based tool, "Web Manager" to configure the xPico. For detailed information on Web Manager configuration and on other methods, see the xPico User Guide. 1. In DeviceInstaller, select the unit and then the Web Configuration tab. Click the Go icon. The Lantronix Web Manager login window appears. 2. For the xPico, there is no default user name or password, so just click OK. 3. Use the menu on the left to navigate to sub-pages where you can configure the xPico module. 4. Commit any changes as follows:  Every sub-page has an OK button that tells the xPico what changes to use, but it does not immediately change the configuration on the device.  When you are finished making all changes to the settings on various pages, then click Apply Settings, which makes the changes permanent and reboots the xPico. xPico-IAP Module From DeviceInstaller it is easy to start a Telnet connection to configure the unit over the network. For detailed information on configuration, see the Modbus Protocol User Guide. 1. In DeviceInstaller, select the unit and then the Telnet Configuration tab. 2. Click the Connect icon. The following information displays: Lantronix Inc. - Modbus Bridge MAC address 0080A366000D Software version V3.3.0.0 (130306) XPICO Press Enter for Setup Mode 3. To enter Setup Mode, press Enter within 5 seconds. The configuration settings display, followed by the change prompt: Select Command or parameter set (1..7) to change: 4. Select an option on the menu by entering the number of the option and pressing Enter. 5. To enter a value for a parameter, type the value and press Enter, or to confirm a current value, just press Enter. 6. When you are finished making all changes to the various settings, use the (S)ave option to save the new configuration by entering S. The unit automatically reboots. xPico Development Kit Quick Start 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
Configure Your xPico Device
Using DeviceInstaller it is easy to configure the unit over the network.
xPico Module
From DeviceInstaller it is easy to start the Lantronix browser-based tool, “Web
Manager” to configure the xPico. For detailed information on Web Manager
configuration and on other methods, see the
xPico User Guide
.
1.
In DeviceInstaller, select the unit and then the
Web Configuration
tab. Click
the
Go
icon. The Lantronix Web Manager login window appears.
2.
For the xPico, there is no default user name or password, so just click
OK.
3.
Use the menu on the left to navigate to sub-pages where you can configure
the xPico module.
4. Commit any changes as follows:
Every sub-page has an
OK
button that tells the xPico what changes to
use, but it does not immediately change the configuration on the device.
When you are finished making all changes to the settings on various
pages, then click
Apply
Settings, which makes the changes permanent
and reboots the xPico.
xPico-IAP Module
From DeviceInstaller it is easy to start a Telnet connection to configure the unit
over the network. For detailed information on configuration, see the Modbus
Protocol User Guide.
1.
In DeviceInstaller, select the unit and then the
Telnet Configuration
tab.
2. Click the
Connect
icon. The following information displays:
Lantronix Inc. - Modbus Bridge
MAC address 0080A366000D
Software version V3.3.0.0 (130306) XPICO
Press Enter for Setup Mode
3. To enter Setup Mode, press
Enter
within 5 seconds. The configuration
settings display, followed by the change prompt:
Select Command or parameter set (1..7) to change:
4.
Select an option on the menu by entering the number of the option and
pressing
Enter
.
5.
To enter a value for a parameter, type the value and press
Enter
, or to
confirm a current value, just press
Enter
.
6.
When you are finished making all changes to the various settings, use the
(S)
ave option to save the new configuration by entering S. The unit
automatically reboots.
xPico Development Kit Quick Start
9