Lenovo 0319A25 User Manual - Page 79
When installing the keyboard, do as follows, Table 22. Removal steps of keyboard continued
View all Lenovo 0319A25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Table 22. Removal steps of keyboard (continued) 7 M2 × 2 mm, wafer-head, nylon-coated (1) Silver 0.181 Nm (1.85 kgfcm) 6 When installing the keyboard, do as follows: Table 23. Installation of the keyboard 1. Attach the connectors. 2. Attach the keyboard so that the keyboard edges are under the frame as shown in this figure. 3. To make sure that the front side of the keyboard is housed firmly, gently press the keys with your thumbs and try to slide the keyboard toward you. 4. Secure the keyboard by tightening the screws from the bottom side of the computer. Chapter 8. Removing and replacing a FRU 73
Table 22. Removal steps of keyboard (continued)
7
M2 × 2 mm, wafer-head, nylon-coated (1)
Silver
0.181 Nm
(1.85 kgfcm)
6
When installing the keyboard, do as follows:
Table 23. Installation of the keyboard
1. Attach the connectors.
2. Attach the keyboard so that the keyboard edges are under the frame as shown in this figure.
3. To make sure that the front side of the keyboard is housed firmly, gently press the keys with your thumbs
and try to slide the keyboard toward you.
4. Secure the keyboard by tightening the screws from the bottom side of the computer.
Chapter 8
.
Removing and replacing a FRU
73