Lenovo 0319A25 User Manual - Page 83
When installing, Attention, Table 25. Removal steps of LCD unit continued
![]() |
View all Lenovo 0319A25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Table 25. Removal steps of LCD unit (continued) 1 M2.5 × 6.5 mm, wafter-head, nylon-coated (2) 2 2 Black 0.392 Nm (4 kgfcm) 3 When installing: Make sure that the connectors are attached firmly to the system board. In step 4 , release wireless antenna cables from the cable guides. 4 4 4 4 4 4 4 4 4 4 4 When installing: Make sure that the cables are attached to the cable guides firmly . Attention: When you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken. Chapter 8. Removing and replacing a FRU 77
![](/manual_guide/products/lenovo-0319a25-user-manual-43667a9/83.png)
Table 25. Removal steps of LCD unit (continued)
1
M2.5 × 6.5 mm, wafter-head, nylon-coated (2)
Black
0.392 Nm
(4 kgfcm)
2
2
3
When installing:
Make sure that the connectors are attached firmly to the system board.
In step
4
, release wireless antenna cables from the cable guides.
4
4
4
4
4
4
4
4
4
4
4
When installing:
Make sure that the cables are attached to the cable guides firmly .
Attention:
When you route the cables, make sure that they are not subjected to any tension. Tension could cause
the cables to be damaged by the cable guides, or a wire to be broken.
Chapter 8
.
Removing and replacing a FRU
77