Lenovo 0319A25 User Manual - Page 87
System board assembly, Important notices for handling the system board, Diagnostics
![]() |
View all Lenovo 0319A25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Table 26. Removal steps of top shielding assembly (continued) 1 M2 × 2 mm, wafer-head, nylon-coated (1) 2 M2 × 3 mm, wafer-head, nylon-coated (2) 3 M2 × 5 mm, wafer-head, nylon-coated (4) Silver Black Black 0.181 Nm (1.85 kgfcm) 0.181 Nm (1.85 kgfcm) 0.181 Nm (1.85 kgfcm) 1170 System board assembly Important notices for handling the system board: When handling the system board, bear the following in mind. • The system board has an accelerometer, which can be broken by applying several thousands of G-forces. Note: Dropping a system board from a height of as little as 6 inches so that it falls flat on a hard bench can subject the accelerometer to as much as 6,000 G's of shock. • Be careful not to drop the system board on a bench top that has a hard surface, such as metal, wood, or composite. • If a system board is dropped, you must test it, using PC-Doctor for DOS, to make sure that the HDD Active Protection SystemTM still functions (see below). Note: If the test shows that HDD Active Protection System is not functioning, be sure to document the drop in any reject report, and replace the system board. • Avoid rough handling of any kind. • At every point in the process, be sure not to drop or stack the system board. • If you put a system board down, be sure to put it only on a padded surface such as an ESD mat or conductive corrugated material. After replacing the system board, run PC-Doctor for DOS to make sure that HDD Active Protection System still functions. The procedure is as follows: 1. Place the computer on a horizontal surface. 2. Run Diagnostics ➙ ThinkPad Devices ➙ HDD Active Protection Test. Attention: Do not apply physical shock to the computer while the test is running. For access, remove these FRUs, in order: • "1010 Battery pack" on page 54 • "1020 Optical drive or travel cover" on page 54 • "1030 Thermal cover" on page 55 • "1040 Hard disk drive (HDD) assembly" on page 56 • "1050 DIMM" on page 57 • "1060 Fan assembly" on page 58 • "1070 CPU" on page 61 • "1080 Wireless WAN slot cover and PCI Express Mini Card for wireless WAN" on page 62 • "1090 Palm rest assembly with cables" on page 65 • "1100 PCI Express Mini Card for wireless LAN" on page 68 • "1110 Backup battery" on page 69 • "1120 Bluetooth daughter card (BDC-2)" on page 70 • "1130 Keyboard" on page 71 • "1140 Keyboard bezel" on page 74 Chapter 8. Removing and replacing a FRU 81
![](/manual_guide/products/lenovo-0319a25-user-manual-43667a9/87.png)