Lenovo 9935B3U User Manual - Page 64
Updating, flashing, operating, system, Recovering, POST/BIOS, update, failure
UPC - 884343247403
View all Lenovo 9935B3U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
5. Type in the seven character serial number of your computer and then press Enter. 6. When prompted to change the machine type/model, press Y. 7. Type in the seven character machine type/model of your computer and then press Enter. 8. Follow the instructions on the screen to complete the update. Updating (flashing) BIOS from your operating system Note: The Web page content (including the links referenced in the following procedure) is subject to change because of the constant improvements made to the Web site. 1. Go to: http://www.lenovo.com/support 2. Locate the Downloadable files for your machine type as follows: a. In the Enter a product field, type your machine type. b. Click Go → Continue → Downloads and drivers. c. Under the BIOS category, click the Flash BIOS update. d. Click the TXT file that contains the installation instructions for the flash BIOS update (flash from the operating system version). 3. Print these instructions. This is very important because they are not on the screen after the download begins. 4. From your browser, click Back to return to the list of files. Carefully follow the printed instructions to download, extract, and install the update. Recovering from a POST/BIOS update failure If the power to your computer is interrupted while POST/BIOS is being updated (flash update), your computer might not restart correctly. If this happens, perform the following procedure which is commonly called Boot-block recovery. 1. Turn off the computer and any attached devices, such as printers, monitors, and external drives. 2. Unplug all power cords from electrical outlets and remove the computer cover. See "Removing the computer cover" on page 14. 3. Access the system board. See "Accessing the system board components and drives" on page 15. 4. Locate the Clear CMOS/Recovery jumper on the system board. See "Locating parts on the system board" on page 11. 5. Remove any cables that might prevent your access to the Clear CMOS/Recovery jumper. 6. Move the jumper from the standard position (pin 1 and pin 2) to pin 2 and pin 3. 7. Reconnect any cables that were disconnected. See "Completing the parts replacement" on page 37. 8. Reinstall the computer cover and reconnect the power cords for the computer and monitor to electrical outlets. 9. Do one of the following: v Insert the POST/BIOS update (flash update) diskette into the diskette drive and turn on the computer and the monitor. 56 User Guide