Lenovo A530 IdeaCentre A530 All-In-One PC Hardware Maintenance Manual - Page 61
Removing the rear cover, Remove the base cover. Refer to Removing the base cover.
View all Lenovo A530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
g. Connect the new scalar and HDMI/DVI cables to the connectors on the scalar board. h. Reattach the rear cover to the LED panel. i. Reattach the hinge to the base and secure it with the 6 screws. j. Connect the new scalar headphone input, scalar and DVI/HDMI cables to the connectors on the motherboard. Step 17. Reattach the base cover and secure it with the screws. Removing the rear cover Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the base cover. To remove the rear cover: Step 1. Step 2. Step 3. Step 4. Step 5. Step 6. Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operating system, and turn off the computer and all attached devices. Unplug all power cords from electrical outlets. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O) cables, and any other cables that are connected to the computer. Refer to "Left and right view" and "Rear view" for help with locating the various connectors. Remove the base cover. Refer to "Removing the base cover". Remove the hinge from the chassis. Refer to "Removing the hinge from the chassis". Raise the hinge 1 and slide the rear deco out as shown. 2 1 2 Step 7. Put the head of a flat head screwdriver between the middle frame and the rear cover as shown. Then using the screwdriver as a lever and the middle frame metal bar as the fulcrum, prise the rear cover away from the middle frame. 1 Le ve r 1 Fulcrum Chapter 8. Replacing hardware 55