Lenovo C355 Lenovo C355/C455 All-In-One Computer Hardware Maintenance Manual - Page 46

Removing the EMI cover, recommends that you use a blanket, towel

Page 46 highlights

Step 10. Remove the two screws that secure camera to the front bezel. 1 Step 11. Lift up the camera 2 and disconnect the data cable from the camera. 3 Step 12. To install the new camera: a. Connect the data cable to the new camera. b. Line up the holes in the new camera with the mounting holes on the front bezel and secure it with the two screws. Step 13. Reattach the middle cover, optical drive, stand holder, foot cover and stand base. Removing the EMI cover Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches or other damage. To replace the EMI cover Step 1. Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operating system, and turn off the computer and all attached devices. Step 2. Unplug all power cords from electrical outlets. 40 Lenovo C355/C455 All-In-One ComputerHardware Maintenance Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83

Step 10. Remove the two screws that secure camera to the front bezel.
1
Step 11. Lift up the camera
2
and disconnect the data cable from the camera.
3
Step 12. To install the new camera:
a.
Connect the data cable to the new camera.
b.
Line up the holes in the new camera with the mounting holes on the front bezel and secure it
with the two screws.
Step 13. Reattach the middle cover, optical drive, stand holder, foot cover and stand base.
Removing the EMI cover
Note:
Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover.
Note:
It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo
recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches
or other damage.
To replace the EMI cover
Step 1.
Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.
Step 2.
Unplug all power cords from electrical outlets.
40
Lenovo C355/C455 All-In-One ComputerHardware Maintenance Manual