Lenovo E100 Hardware Maintenance Manual - Page 111

Completing, replacement

Get Lenovo E100 PDF manuals and user guides View all Lenovo E100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 111 highlights

Completing the FRU replacement After replacing FRUs, you need to install any removed parts, replace the cover, and reconnect any cables, including telephone lines and power cords. Also, depending on the FRU that is replaced, you might need to confirm the updated information in the Setup Utility program. Note: When the power cord is first plugged in, the computer might appear to turn on for a few seconds and then turn off. This is a normal sequence to enable the computer to initialize. 1. Ensure that all components have been reassembled correctly and that no tools or loose screws are left inside the computer. 2. Replace the covers that were removed and secure them with the thumb screws. 3. Reconnect the external cables and power cords to the computer. See "Locating the connectors on the rear of your computer" on page 82. 4. If you have replaced the system board, you must update (flash) the BIOS. See "Flash update procedures" on page 111. 5. Some FRU replacements require the configuration to be updated. See Chapter 6, "Using the Setup Utility," on page 49. Chapter 8. Replacing FRUs (Type 9626) 105

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
Completing
the
FRU
replacement
After
replacing
FRUs,
you
need
to
install
any
removed
parts,
replace
the
cover,
and
reconnect
any
cables,
including
telephone
lines
and
power
cords.
Also,
depending
on
the
FRU
that
is
replaced,
you
might
need
to
confirm
the
updated
information
in
the
Setup
Utility
program.
Note:
When
the
power
cord
is
first
plugged
in,
the
computer
might
appear
to
turn
on
for
a
few
seconds
and
then
turn
off.
This
is
a
normal
sequence
to
enable
the
computer
to
initialize.
1.
Ensure
that
all
components
have
been
reassembled
correctly
and
that
no
tools
or
loose
screws
are
left
inside
the
computer.
2.
Replace
the
covers
that
were
removed
and
secure
them
with
the
thumb
screws.
3.
Reconnect
the
external
cables
and
power
cords
to
the
computer.
See
“Locating
the
connectors
on
the
rear
of
your
computer”
on
page
82.
4.
If
you
have
replaced
the
system
board,
you
must
update
(flash)
the
BIOS.
See
“Flash
update
procedures”
on
page
111.
5.
Some
FRU
replacements
require
the
configuration
to
be
updated.
See
Chapter
6,
“Using
the
Setup
Utility,”
on
page
49.
Chapter
8.
Replacing
FRUs
(Type
9626)
105