Lenovo IdeaCentre A310 Lenovo IdeaCentre A3 Series User Guide V2.0 - Page 18

Note: If the wireless indicator lights stop blinking, press the connect buttons on the keyboard and mouse again. 3. After entering the system, press the bluetooth connect button on the base stand for over 5 seconds to search for wireless devices. Note: The process of searching for wireless devices could take several minutes. 4. When the wireless mouse device is found, the driver will be installed automatically. 5. When the wireless keyboard device is found, enter the PIN code and press the Enter key to finish the pairing process. 6. Once the wireless connection has been successfully established, the wireless keyboard and mouse will work properly. Method 2: Notes: • Before using the method below, enter the system and prepare a set of wired keyboard and mouse. • If you want to install a new set of wireless keyboard and mouse, follow the steps below. 1. Using the wired keyboard and mouse to enter the system. 2. After installing the batteries into the wireless keyboard and mouse battery compartments, make sure the power switch on the back of the mouse is in the ON position (the keyboard does not have a power switch). 3. Press the wireless connect buttons on the keyboard and mouse to make the indicator lights blink green. Note: If the wireless indicator lights stop blinking, press the connect buttons on the keyboard and mouse again. 4. To open the Devices and Printers dialog box, go to Windows and click Start → Control Panel → Hardware and Sound. Press Add a device to pop-up a dialog box. 5. Select the Lenovo Bluetooth Mouse and click Next to establish the bluetooth connection. 6. Select the Lenovo Bluetooth keyboard and click Next. (Press Add a device icon if the dialog box is closed and press the connect button again.) 7. Enter the pairing code and press the Enter key to complete the bluetooth connection. User Guide 13 31044343_A3_UG_EN_V2.0.indd 13 2010.5.20 10:59:29 AM