Lenovo IdeaCentre B505 Lenovo IdeaCentre B5 Series Hardware Maintenance Manual - Page 46

Replacing the Rear IO module

Get Lenovo IdeaCentre B505 PDF manuals and user guides View all Lenovo IdeaCentre B505 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

Hardware Maintenance Manual 9. To secure the microprocessor in the socket, close the microprocessor retainer and lock it into position with the small handle. 10. Use the thermal grease syringe to place five drops of grease on the top of the microprocessor. Each drop of grease should be 0.03ml (3 tick marks on the grease syringe). 11. Install the thermal module. 12. Screw back the computer back cover to the computer chassis. Replacing the Rear IO module To replace the rear IO module 1. Remove the computer cover. Refer to "Removing the computer cover". 2. Remove the three screws that secure the rear IO to the chassis. Pull the rear IO away from the chassis. 3. Align and screw a new rear IO back to the chassis. 4. Screw back the computer back cover to the computer chassis. 44

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
Hardware Maintenance Manual
44
9.
To secure the microprocessor in the socket, close the microprocessor
retainer and lock it into position with the small handle.
10. Use the thermal grease syringe to place five drops of grease on the top
of the microprocessor. Each drop of grease should be 0.03ml (3 tick
marks on the grease syringe).
11. Install the thermal module.
12. Screw back the computer back cover to the computer chassis.
Replacing the Rear IO module
To replace the rear IO module
1.
Remove the computer cover. Refer to “Removing the computer cover”.
2.
Remove the three screws that secure the rear IO to the chassis. Pull the
rear IO away from the chassis.
3.
Align and screw a new rear IO back to the chassis.
4.
Screw back the computer back cover to the computer chassis.