Lenovo IdeaCentre Q190 Hardware Maintenance Manual - Page 33

Removing the computer cover, system, and turn off the computer and all attached devices.

Get Lenovo IdeaCentre Q190 PDF manuals and user guides View all Lenovo IdeaCentre Q190 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

Step 5. Remove the 3 screws and slide the optical disk drive out as shown. Step 6. Install the new optical drive as follows: a. Align the new optical drive with the bezel, push it into position and secure it with 3 screws. b. Line up the optical drive bezel with the optical disk drive box and secure it with the remaining screws. Removing the computer cover Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches or other damage. To remove the computer cover Step 1. Step 2. Step 3. Remove any media (disks, CDs, or memory cards) from the drives, shut down the operating system, and turn off the computer and all attached devices. Unplug all power cords from electrical outlets. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O) cables, and any other cables that are connected to the computer. Refer to "Left and right view" and "Rear view" for help with locating the various connectors. Chapter 8. Replacing hardware 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
Step 5.
Remove the 3 screws and slide the optical disk drive out as shown.
Step 6.
Install the new optical drive as follows:
a.
Align the new optical drive with the bezel, push it into position and secure it with 3 screws.
b.
Line up the optical drive bezel with the optical disk drive box and secure it with the remaining
screws.
Removing the computer cover
Note:
Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover.
Note:
It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo
recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches
or other damage.
To remove the computer cover
Step 1.
Remove any media (disks, CDs, or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.
Step 2.
Unplug all power cords from electrical outlets.
Step 3.
Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to “Left and right view”
and “Rear view” for help with locating the various connectors.
Chapter 8
.
Replacing hardware
27