Lenovo IdeaPad S400u Hardware Maintanence Manual - Page 57

LCD panel, LCD cable

Page 57 highlights

Lenovo IdeaPad S400 1110 LCD panel, LCD cable For access, remove these FRUs in order: • "1010 Battery pack" on page 33 • "1020 Hard disk drive" on page 35 • "1030 DIMM" on page 37 • "1040 PCI Express Mini Card for wireless LAN/WAN" on page 38 • "1050 Fan assembly and Heat Sink assembly" on page 40 • "1060 Keyboard" on page 42 • "1070 System board" on page 44 • "1080 LCD unit" on page 47 • "1090 Speakers, base cover, USB board, power assembly and power board" on page 49 • "1100 LCD front bezel" on page 52 Figure 11. LCD panel, LCD cable Remove screws a b. a a b b Step a Screw (quantity) 2.0 × 2.5 mm, flat-head, nylok-coated(2) 2.0x3mm , flat-head, nylok-coated(2) Color Silver black Torque 1.85 kgfcm 1.85 kgfcm Disconnect the connector b , lift the LCD panel in the direction shown by arrow c. c b When installing: Make sure that the connector is attached firmly. 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83

Lenovo IdeaPad S400
53
1110 LCD panel, LCD cable
For access, remove these FRUs in order:
“1010 Battery pack” on page 33
“1020 Hard disk drive” on page 35
“1030 DIMM” on page 37
“1040 PCI Express Mini Card for wireless LAN/WAN” on page 38
“1050 Fan assembly and Heat Sink assembly” on page 40
“1060 Keyboard” on page 42
“1070 System board” on page 44
“1080 LCD unit” on page 47
“1090 Speakers, base cover, USB board, power assembly and power board”
on page 49
“1100 LCD front bezel” on page 52
Figure 11. LCD panel, LCD cable
Remove screws
.
Disconnect the connector
, lift the LCD panel in the direction shown by arrow
When installing:
Make sure that the connector is attached firmly.
Step
Screw (quantity)
Color
Torque
2.0 × 2.5 mm, flat-head, nylok-coated(2)
2.0x3mm
, flat-head, nylok-coated(2)
Silver
black
1.85 kgfcm
1.85 kgfcm
a
b
a
a
b
b
a
b
c
c
b