Lenovo IdeaPad U460S Lenovo IdeaPad U460 Hardware Maintenance Manual V2.0 - Page 62

base cover and bluetooth card, 1090 Keyboard bezel

Page 62 highlights

IdeaPad U460 Hardware Maintenance Manual 1140 base cover and bluetooth card For access, remove these FRUs in order: •• "1010 Battery pack" on page 34 •• "1020 Dummy card" on page 35 •• "1030 Hard disk drive (HDD) cover" on page 36 •• "1040 Hard disk drive" on page 37 •• "1050 DIMM cover" on page 38 •• "1060 DIMM" on page 39 •• "1070 PCI Express Mini Card for wireless LAN/WAN" on page 40 •• "1080 Keyboard" on page 42 •• "1090 Keyboard bezel" on page 44 •• "1100 LCD unit" on page 49 •• "1110 System board" on page 51 Figure 14. Removal steps of base cover and bluetooth card Remove the screw 1, and then remove the power assembly in the direction shown by arrows 2. 1 2 2 Step 1 Screw (quantity) M2.5 × 6 mm, flat-head, nylok-coated (1) Color Black Torque 2.5 kgfcm When installing: Make sure that the power connector is attached firmly. 58

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88

58
IdeaPad U460 Hardware Maintenance Manual
1140 Base cover and bluetooth card
For access, remove these FRUs in order:
“1010 Battery pack” on page 34
“1020 Dummy card” on page 35
“1030 Hard disk drive (HDD) cover” on page 36
“1040 Hard disk drive” on page 37
“1050 DIMM cover” on page 38
“1060 DIMM” on page 39
“1070 PCI Express Mini Card for wireless LAN/WAN” on page 40
“1080 Keyboard” on page 42
“1090 Keyboard bezel” on page 44
“1100 LCD unit” on page 49
“1110 System board” on page 51
Figure 14. Removal steps of base cover and bluetooth card
Remove the screw
1
, and then remove the power assembly in the direction
shown by arrows
2
.
2
2
1
Step
Screw (quantity)
Color
Torque
1
M2.5 × 6 mm, flat-head, nylok-coated (1)
Black
2.5 kgfcm
When installing:
Make sure that the power connector is attached firmly.