Lenovo K100 K100 User's Guide - Page 10
ANT-IN, L&R, SPDIF, Voltage - 100 off
View all Lenovo K100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
models are equipped with this connector) ANT-IN - ANT-IN Connector: To connect the digital signal input cable. (Some models are equipped with this connector) L&R --- Left and right audio connector: Audio input connector. (Some models are equipped with this connector) --- Chassis Side Lock: After installing the side panel of the chassis, push the lock upward to lock the side panel in place. To remove the side panel, depress the lock first. --- Audio Line-in Connector: To connect audio input to the computer. - Audio Line-out Connector: To connect to the speakers or headphones. ---- Microphone Jack: To connect to audio input from a microphone. SPDIF -- SPDIF Audio Line-out Connector: Output the SPDIF audio signal. Voltage - selection switch (Some models are equipped with this switch) 110 Check the position of the voltage-selection switch on the rear of the computer. Use a ballpoint pen to slide the switch, if necessary. 1. If the voltage supply range is 100-127 V ac, set the switch to 110 V. 2. If the voltage supply range is 200-240 V ac, set the switch to 230 V. ---- Used to attach your computer to a telephone line for modem use. (some models equipped with this connector) --- Used to attach a telephone line to your computer for modem use. (some models equipped with this connector) 6 Lenovo 3000K User Guide 31031422 Greenland UG_EN.indd 6 2007.8.20 4:58:03 PM