Lenovo K450e Lenovo K4 Series Hardware Maintenance Manual - Page 38
Step 7. To remove the microprocessor, from the system board, press then slide the small handle out,
View all Lenovo K450e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Step 7. To remove the microprocessor 3 from the system board, press then slide the small handle out to spring it up. 1 and open the retainer. 2 Attention: Do not touch the gold contacts on the bottom of the microprocessor. When handing the microprocessor, touch only the sides. Note: Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be kept as clean as possible. 34 Lenovo K4 SeriesHardware Maintenance Manual
Step 7. To remove the microprocessor
3
from the system board, press then slide the small handle out
to spring it up.
1
and open the retainer.
2
Attention:
Do not touch the gold contacts on the bottom of the microprocessor. When handing the
microprocessor, touch only the sides.
Note:
Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must
be kept as clean as possible.
34
Lenovo K4 SeriesHardware Maintenance Manual