Lenovo L2262 Wide Flat Panel Monitor Lenovo L2262 Wide Flat Panel Monitor User - Page 17

Selecting a supported display mode The display mode the monitor uses is controlled by the computer. Therefore, refer to your computer documentation for details on how to change display modes. The image size, position and shape might change when the display mode changes. This is normal and the image can be readjusted using automatic image setup and the image controls. Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat Panel technology is inherently flicker-free. Note: If your system has previously been used with a CRT monitor and is currently configured to a display mode outside the range of this monitor, you may need to reattach the CRT monitor temporarily until you have re-configured the system; preferably to 1920 x 1080 at 60 Hz, which is the Native Resolution Display mode. The display modes shown below have been optimized at the factory. Table 2-3. Factory set display modes Addressability NTSC PAL 640x350 640x480 720x400 800x600 832x624 1152x864 1024x768 1280x720 1280x800 1280x1024 1440x900 1600x900 1680x1050 1680x1050 1920x1080 Refresh rate 60Hz 50Hz 70Hz 60Hz，72Hz，75Hz 70Hz 56Hz，60Hz，72Hz，75Hz 75Hz 75Hz 60Hz，70Hz，75Hz 60Hz 75Hz 60Hz，70Hz，75Hz 60Hz，75Hz 60Hz，75Hz 60Hz 75Hz（only VGA) 60Hz Chapter 2. 2-7