Lenovo NetVista A40p Hardware Maintenance Manual for NetVista 6018, 6058, 6059 - Page 20
Video cable, connected and/or enabled - netvista drivers
View all Lenovo NetVista A40p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Diagnostic Error Code 005-024-XXXVideo Addressing test failure 005-025-XXXVideo Checksum Value error 005-027-XXXVideo Configuration/Setup error 005-031-XXXVideo Device Cable failure 005-032-XXXVideo Device Controller failure 005-036-XXXVideo Register error 005-038-XXXSystem BIOS extension failure 005-040-XXXVideo IRQ failure 005-195-XXXVideo Test aborted by user 005-196-XXXVideo test halt, error threshold exceeded 005-197-XXXVideo test warning 005-198-XXXVideo test aborted FRU/Action 1. Video card, if installed 2. System board 1. Video card, if installed 2. System board 1. Run Setup 2. Video drivers update 3. Video card, if installed 4. System board 1. Video cable 2. Monitor 3. Video card, if installed 4. System board 1. Video card, if installed 2. System board 1. Video card, if installed 2. System board 1. Video card, if installed 2. System board 1. Video card, if installed 2. System board 1. Information 2. Re-start the test, if necessary 1. Press F3 to review the log file 2. Re-start the test to reset the log file 1. Make sure the component that is called out is connected and/or enabled 2. Re-run test 3. Component that is called out in warning statement 4. Component under test 1. If a component is called out, make sure it is connected and/or enabled 2. Flash the system and re-test 3. Go to the ″Undetermined problems″ section 6 Hardware Maintenance Manual: IBM NetVista Computer Types 6058, 6059, 6269, 6568, 6569, 6578, 6579, 6648, 6649