Lenovo NetVista Hardware Maintenance Manual (HMM) for IBM NetVista 6029 system - Page 32
What to do next, Close the retaining clips.
View all Lenovo NetVista manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
3. To locate the DIMM connectors. See "Identifying parts on the system board" on page 24. 4. Open the retaining clips. 5. Make sure the notches in the DIMM align with the tabs on the connector. Push or insert the DIMM straight down into the connector until the retaining clips close. Notches To remove a DIMM: 1. Remove the cover. See "Removing the cover" on page 23. 2. You might have to remove an adapter to gain access to the DIMM slots. See "Installing and removing adapters" on page 27. 3. To locate the DIMM connectors. See "Identifying parts on the system board" on page 24. 4. Open the retaining clips. 5. Lift the DIMM out of the DIMM slot. 6. Close the retaining clips. What to do next: v Replace any adapters that were removed. v Replace the power supply. v To work with another option, go to the appropriate section. v To complete the installation, go to "Replacing the cover and connecting the cables" on page 33. 26 Hardware Maintenance Manual