Lenovo NetVista (English) User guide - Page 60
Connecting an additional IDE CD drive or DVD drive, Connecting an additional IDE hard disk drive,
View all Lenovo NetVista manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
5. If you have a CD-ROM audio cable, connect it to the drive and to the system board. See "Identifying parts on the system board" on page 40. Connecting an additional IDE CD drive or DVD drive 1. Locate the secondary IDE connector on the system board and the three-connector signal cable. See "Identifying parts on the system board" on page 40. 2. Connect the extra connector in the signal cable to the new CD drive or DVD drive. 3. Your computer has extra power connectors for additional drives. Connect a power connector to the drive. Connecting an additional IDE hard disk drive 1. Locate the primary IDE connector on the system board. One end of the three-connector cable connects to the hard disk drive, and the other connects to the system board. See "Identifying parts on the system board" on page 40. 2. Connect the extra connector in the signal cable to the new hard disk drive. 3. Your computer has extra power connectors for additional drives. Connect a power connector to the drive. What to do next v To work with another option, go to the appropriate section. v To complete the installation, go to "Replacing the cover and connecting the cables" on page 51. Installing a rope clip To help prevent hardware theft, you can add a 3/16-inch or 5-mm rope clip and cable to your computer. After you add the security cable, make sure that it does not interfere with other cables that are connected to the computer. For more information about security, see Installing a cable lock in Access IBM. To install a rope clip: 1. Remove the cover. See "Removing the cover" on page 39. 2. Use a tool, such as a screwdriver, to remove the two metal knockouts. 48 User Guide