Lenovo NetVista (English) User guide - Page 82
Connect one end of the signal cable to the drive and the other to the secondary,
View all Lenovo NetVista manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
6. Install the drive into the bay. Align the screw holes, and insert the screws that secure the drive to the bay. 7. Each integrated drive electronics (IDE) drive requires two cables; a four-wire power cable that connects to the power supply and a signal cable that connects to the system board. For a CD-ROM drive, you might also have an audio cable. 70 User Guide The steps to connect an IDE drive are different depending on the type of drive you are connecting. Use one of the following procedures for your drive connection. Connecting the first IDE CD drive or DVD drive 1. Locate the three-connector signal cable that comes with your computer or with the new drive. 2. Locate the secondary IDE connector on the system board. See "Identifying parts on the system board" on page 63. 3. Connect one end of the signal cable to the drive and the other to the secondary IDE connector on the system board. To reduce electronic noise, use the connectors at the end of the cable only. 4. Your computer has extra power connectors for additional drives. Connect a power connector to the drive.