Lenovo ThinkPad 600X TP 600E User's Reference - Page 104
Warm-Swaping a Device in the UltraslimBay, UltraBay, Enable IDE, device Hot/Warm Swap
View all Lenovo ThinkPad 600X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Replacing an UltraslimBay Device Warm-Swaping a Device in the UltraslimBay Warm swap means to remove or reconnect a device when the computer is in suspend mode. Warm swap is enabled as a default for your computer. To check whether warm swap is enabled, do as follows: 1 Start the ThinkPad Configuration program. "ThinkPad Configuration Program" on page 25. 2 Click on UltraBay ( ). 3 Make sure that there is a check mark in the Enable IDE device Hot/Warm Swap check box. If there is no check mark, put a check mark in the box and restart your computer to make the change effective. To warm-swap a device in the UltraslimBay, enter the computer into suspend mode; the swap the device. Make sure that the bay LED is off when you remove the UltraslimBay device. Bay LED 90 IBM ThinkPad 600E User's Reference (Bottom view)