Lenovo ThinkPad 600X TP 600E User's Reference - Page 130
For OS/2 Warp, System Setup, Hardware Manager, Properties, No Hardware, Detection, Utilities,
View all Lenovo ThinkPad 600X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Hints and Limitations OS/2 For OS/2 Warp: If you have formatted your drive using high-performance file system (HPFS) and your system has more than 64 MB memory installed, hibernation mode is not supported. If the COM port does not work even though you have set it up correctly with the ThinkPad Configuration program, do as follows: 1. Open System Setup. 2. Select Hardware Manager. 3. Select a folder from the menu. 4. Select Properties. 5. In the default pull-down menu, select No Hardware Detection. If it has already been selected, change the setting. 6. Open the ThinkPad Configuration program. 7. Set the COM port as desired. 8. Restart the system. To receive incoming faxes or mail, you must set the modem settings in the fax application to one of the following: - Hardware FIFO enabled - Hardware Flow Control on - UART 16550A modem In OS/2 FaxWorks for example, select Utilities, Settings, Modem Type, and Use HW FIFO (16550A). If you do not set your modem to one of these settings, you will not be able to receive an incoming fax or an incoming call in suspend mode. If you do not have the PC Card device driver for OS/2 but you have one for DOS, your PC Card might run in the VDM (virtual DOS machine) environment. Refer to the Online User's Guide for setting the VDM and the sample configuration files on the PC Card Installation Diskette for OS/2, Windows 95, Windows 98. (If the PC Card Installation Diskette did not come with the computer, create it using the Diskette Factory program.) 116 IBM ThinkPad 600E User's Reference