Lenovo ThinkPad 770X ThinkPad 770 User's Guide - Page 83
FDD-1, Reset, Network, Enter, The Speed menu
View all Lenovo ThinkPad 770X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Title: C79DMMST CreationDate: 07/16/97 13:09:22 in the docking station, that diskette drive becomes FDD-1. If you have an additional diskette drive, that drive becomes FDD-2. The hard disk drive in your computer is HDD-1. If you have a hard disk drive in the UltraBay II, that drive becomes HDD-2. The HDD-3 and HDD-4 are the external hard disk drives on the docking station. 4 Move the cursor to the Reset icon; and click on it. 5 Select the first device you want for the startup sequence; then click on it. The device moves up to box 1. You cannot set a hard disk drive before a PCMCIA** card. 6 If you are using a remote program loading (RPL) system through a token-ring card or some other network card, do the following: a Select Network and click on it. The "Speed" menu appears. b If you are using a token-ring card, select the speed you want (4 or 16), and click on it; then press Enter. If you are using a network card other than a token-ring card, such as an Ethernet card, you need not specify the RPL speed. Press Esc and exit this menu. 7 Repeat these steps for the other devices. You can set up to four devices. 8 Click on OK or press Enter to save the changes. Chapter 2. Fine-Tuning Your Computer 2-59