Lenovo ThinkPad T420si Hardware Maintenance Manual - Page 60
Error messages, Beep symptoms, Table 2. Numeric error codes continued, Table 3. Error messages
View all Lenovo ThinkPad T420si manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Table 2. Numeric error codes (continued) Symptom or error 2102 Detection error on HDD2 (Mini SATA) 2110 Read error on HDD0 (Main HDD) 2111 Read error on HDD1 (Ultrabay HDD) 2112 Read error on HDD2 (Mini SATA) 2200 Machine Type and Serial Number are invalid. 2201 Machine UUID is invalid. FRU or action, in sequence 1. Reseat the Mini SATA device. 2. Mini SATA device. 3. System board. 1. Reseat the hard disk drive. 2. Main hard disk drive. 3. System board. 1. Reseat the hard disk drive. 2. Ultrabay hard disk drive. 3. System board. 1. Reseat the Mini SATA device. 2. Mini SATA device. 3. System board. System board. System board. Error messages Table 3. Error messages Symptom or error Fan error. Thermal sensing error. This system does not support batteries that are not genuine Lenovo-made or authorized. The system will continue to boot, but may not charge unauthorized batteries. ATTENTION: Lenovo has no responsibility for the performance or safety of unauthorized batteries, and provides no warranties for failures or damage arising out of their use. FRU or action, in sequence 1. Fan. 2. Thermal grease. 3. System board. System board. Replace the battery. Beep symptoms Table 4. Beep symptoms Symptom or error FRU or action, in sequence One beep and a blank, unreadable, or flashing LCD. 1. Reseat the LCD connector. 2. LCD assembly. 3. External CRT. 4. System board. One long and two short beeps, and a blank or unreadable LCD. 1. System board. 2. LCD assembly. 3. DIMM. Two short beeps with error codes. POST error. See Numeric error codes. Two short beeps and a blank screen. 1. System board. 2. DIMM. 54 Hardware Maintenance Manual