Lenovo ThinkPad T430 Hardware Maintenance Manual - ThinkPad T430, T430i - Page 48

Symptom-to-FRU index, Numeric error codes, replaced next. - notebook

Page 48 highlights

Symptom-to-FRU index This section contains following information: • "Numeric error codes" on page 42 • "Error messages" on page 44 • "Beep symptoms" on page 44 • "No-beep symptoms" on page 44 • "LCD-related symptoms" on page 44 • "Intermittent problems" on page 45 • "Undetermined problems" on page 45 The symptom-to-FRU index in this section lists symptoms and errors and their possible causes. The most likely cause is listed first, in boldface type. Note: Do the FRU replacement or other actions in the sequence shown in the column headed "FRU or action, in sequence." If replacing a FRU does not solve the problem, put the original part back in the computer. Do not replace a nondefective FRU. This index can also help you determine, during regular servicing, what FRUs are likely to need to be replaced next. A numeric error is displayed for each error detected in POST or system operation. In the displays, n can be any number. If no numeric code is displayed, check the narrative descriptions of symptoms. If the symptom is not described there, go to "Intermittent problems" on page 45. Note: For a device not supported by diagnostic codes in the ThinkPad notebook computers, see the manual for that device. Numeric error codes Table 1. Numeric error codes Symptom or error 0177 Bad SVP data, stop POST task-The checksum of the supervisor password in the EEPROM is not correct. FRU or action, in sequence System board. 0183 Bad CRC of Security Settings in EFI Variable. Enter the ThinkPad Setup program. 1. Run the ThinkPad Setup program, and then save current setting by pressing F10. 2. System board. 0187 System board. EAIA data access error-The access to EEPROM is failed. 0188 Invalid RFID Serialization Information Area. 0189 Invalid RFID configuration information area-The EEPROM checksum is not correct. System board. System board. 0190 Critical low-battery error 1. Charge the battery pack. 2. Battery pack. 0191 System Security-Invalid Remote Change requested. 1. Run the ThinkPad Setup program, and then save current setting by pressing F10. 2. System board. 42 ThinkPad T430 and T430i Hardware Maintenance Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124

Symptom-to-FRU index
This section contains following information:
“Numeric error codes” on page 42
“Error messages” on page 44
“Beep symptoms” on page 44
“No-beep symptoms” on page 44
“LCD-related symptoms” on page 44
“Intermittent problems” on page 45
“Undetermined problems” on page 45
The symptom-to-FRU index in this section lists symptoms and errors and their possible causes. The most
likely cause is listed first, in boldface type.
Note:
Do the FRU replacement or other actions in the sequence shown in the column headed “FRU or
action, in sequence.” If replacing a FRU does not solve the problem, put the original part back in the
computer. Do not replace a nondefective FRU.
This index can also help you determine, during regular servicing, what FRUs are likely to need to be
replaced next.
A numeric error is displayed for each error detected in POST or system operation. In the displays,
n
can
be any number.
If no numeric code is displayed, check the narrative descriptions of symptoms. If the symptom is not
described there, go to “Intermittent problems” on page 45.
Note:
For a device not supported by diagnostic codes in the ThinkPad notebook computers, see the
manual for that device.
Numeric error codes
Table 1. Numeric error codes
Symptom or error
FRU or action, in sequence
0177
Bad SVP data, stop POST task—The checksum of the
supervisor password in the EEPROM is not correct.
System board.
0183
Bad CRC of Security Settings in EFI Variable. Enter the
ThinkPad Setup program.
1.
Run the ThinkPad Setup program, and then save
current setting by pressing F10.
2. System board.
0187
EAIA data access error—The access to EEPROM is failed.
System board.
0188
Invalid RFID Serialization Information Area.
System board.
0189
Invalid RFID configuration information area—The
EEPROM checksum is not correct.
System board.
0190
Critical low-battery error
1.
Charge the battery pack.
2. Battery pack.
0191
System Security—Invalid Remote Change requested.
1.
Run the ThinkPad Setup program, and then save
current setting by pressing F10.
2. System board.
42
ThinkPad T430 and T430i Hardware Maintenance Manual