Lenovo ThinkPad T430 Hardware Maintenance Manual - ThinkPad T430, T430i - Page 50

Error messages, Beep symptoms, LCD-related symptoms - memory

Page 50 highlights

Error messages Table 2. Error messages Symptom or error Fan error. Thermal sensing error. The battery installed is not supported by this system and will not charge. Please replace the battery with the correct Lenovo battery for this system. Press the ESC key to continue. FRU or action, in sequence 1. Fan. 2. Thermal grease. 3. System board. System board. Replace the battery. Beep symptoms Table 3. Beep symptoms Symptom or error Four cycles of four short beeps Five short beeps, pause, and five more short beeps One short beep, pause, three short beeps, pause, three more short beeps, pause, and one short beep Three short beeps, pause, one short beep, pause, one more short beep, pause, and three short beeps Five short beeps One long and two short beeps FRU or action, in sequence System board System board 1. Memory module. 2. System board. Remove the installed PCI devices. System board System board No-beep symptoms Table 4. No-beep symptoms Symptom or error No beep, power-on indicator on, LCD blank, and no POST. No beep, power-on indicator on, and LCD blank during POST. The power-on password prompt appears. The hard-disk password prompt appears. FRU or action, in sequence 1. Ensure that every connector is connected tightly and correctly. 2. Memory module. 3. System board. 1. Reseat memory module. 2. System board. A power-on password or a supervisor password is set. Type the password and press Enter. A hard-disk password is set. Type the password and press Enter. LCD-related symptoms Important: The TFT LCD for the notebook computer contains many thin-film transistors (TFTs). The presence of a small number of dots that are missing, discolored, or always lighted is characteristic of TFT LCD technology, but excessive pixel problems can cause viewing concerns. If the LCD you are servicing has two or less visible defective pixels, it should not be considered faulty. However, if the LCD has three or more visible defective pixels, it will be deemed as defective by Lenovo and it should be replaced. 44 ThinkPad T430 and T430i Hardware Maintenance Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124

Error messages
Table 2. Error messages
Symptom or error
FRU or action, in sequence
Fan error.
1.
Fan
.
2. Thermal grease.
3. System board.
Thermal sensing error.
System board
.
The battery installed is not supported by this system
and will not charge. Please replace the battery with the
correct Lenovo battery for this system. Press the ESC
key to continue.
Replace the battery
.
Beep symptoms
Table 3. Beep symptoms
Symptom or error
FRU or action, in sequence
Four cycles of four short beeps
System board
Five short beeps, pause, and five more short beeps
System board
One short beep, pause, three short beeps, pause, three
more short beeps, pause, and one short beep
1.
Memory module
.
2. System board.
Three short beeps, pause, one short beep, pause, one
more short beep, pause, and three short beeps
Remove the installed PCI devices.
Five short beeps
System board
One long and two short beeps
System board
No-beep symptoms
Table 4. No-beep symptoms
Symptom or error
FRU or action, in sequence
No beep, power-on indicator on, LCD blank, and no
POST.
1.
Ensure that every connector is connected tightly
and correctly
.
2. Memory module.
3. System board.
No beep, power-on indicator on, and LCD blank during
POST.
1.
Reseat memory module
.
2. System board.
The power-on password prompt appears.
A power-on password or a supervisor password is set.
Type the password and press
Enter
.
The hard-disk password prompt appears.
A hard-disk password is set. Type the password and
press
Enter
.
LCD-related symptoms
Important:
The TFT LCD for the notebook computer contains many thin-film transistors (TFTs). The
presence of a small number of dots that are missing, discolored, or always lighted is characteristic of TFT
LCD technology, but excessive pixel problems can cause viewing concerns.
If the LCD you are servicing has two or less visible defective pixels, it should not be considered faulty.
However, if the LCD has three or more visible defective pixels, it will be deemed as defective by Lenovo and
it should be replaced.
44
ThinkPad T430 and T430i Hardware Maintenance Manual